Product Introduction:

The characteristic of TBI ball linear guide rail is high positioning accuracy. When the linear slide rail moves, the friction force is very small, belonging to rolling friction. Therefore, only minimal power is needed to drive the platform. Due to the small friction force, the heat generated by friction is minimal. Compared with traditional sliding methods, it can significantly reduce the wear of the contact surface of the running rail, and can maintain high positioning accuracy, walking accuracy, and low wear for a long time.

Product features:

The high rigidity slide and track are designed with four directions of equal load, so for loads from all directions, they must have sufficient resistance strength and the ability to automatically adjust the center, allowing for large installation errors to make processing easier, and can be applied with sufficient preload to achieve high rigidity. Compared to traditional sliding systems, maintenance and upkeep are easier, and both involve scraping or grinding the running track surface. The wear caused by sliding often requires the machine to be re scraped or ground for a period of time, which is time-consuming and costly. Linear sliding rails have interchangeability, and if replaced or repaired, the walking accuracy of the machine can be restored.

Due to the contact between the slider and the track and the rolling point of the steel ball probe, the friction coefficient is extremely small and it is not easy to generate heat. Therefore, only a very small amount of power is required to drive the machine to run. Because the required driving force is small and the power consumption is low, it is more suitable for high-speed operation compared to sliding devices. Clearance free high Mechanical efficiency When preloading mode or working load is applied, the steel ball contacts at two points in the load direction, and differential sliding is small, so that good rolling movement can be obtained and efficiency can be improved.

High assembly with flange TRH-F

The TRH-F series is different from the traditional linear sliding mode and belongs to rolling friction. It has small contact points, low friction, and is not easy to generate heat energy, so it only requires minimal driving force to operate the machine. In contrast, it also reduces the consumption of the sliding rail and extends the service life of the sliding rail group. The slider of TBI MOTION adopts a special patented design to increase material thickness, improve the strength of spare parts, and make the sliding seat less prone to deformation, effectively increasing stability. The slider group of TBI MOTION is designed with special contact points and has the function of automatic centering, allowing the slider to move on the slide rail in a high-precision and smooth manner.

Model: TRH15FN/TRH15FL, TRH20FN/TRH20FE, TRH25FN/TRH25FE, TRH30FN/TRH30FE, TRH35FN/TRH35FE, TRH45FL/TRH45FE, TRH55FL/TRH55FE, TRH65FL/TRH65FE.